Skip to content
  • Business
  • Education
  • Entertainment
  • Fashion
  • Health
  • Technology
  • Business
  • Education
  • Entertainment
  • Fashion
  • Health
  • Technology
Close

Search

  • Business
  • Education
  • Entertainment
  • Fashion
  • Health
  • Technology
  • Business
  • Education
  • Entertainment
  • Fashion
  • Health
  • Technology
Close

Search

Lifestyle

How to Clean a Washing Machine With Vinegar and Baking Soda

By liam alexanders
November 5, 2026

Your washing machine cleans your clothes, but who cleans the washing machine? Over time, detergent residue, fabric softener, hard water minerals, and mold build up inside the drum, the door seal, and the dispenser drawer. That buildup causes bad smells, leaves residue on clothes, and can make the machine less efficient.

Vinegar and baking soda are a popular natural fix, but most guides get one detail wrong: they tell you to mix them together. Vinegar is an acid and baking soda is a base. When you mix them, they fizz and cancel each other out before they clean much. The method that actually works is to use them separately, in two hot cycles. This guide shows you how, for both front-loaders and top-loaders.

Why Your Washing Machine Smells

Front-loaders are the most common culprits. Water sits in the rubber door seal, and detergent residue feeds mold. Top-loaders can smell too, especially if you always wash in cold water and never run a hot cleaning cycle.

Signs your machine needs cleaning include a musty smell, black spots on the rubber seal, residue on clothes, or a drawer that feels slimy. Clean your machine once a month, or more often if you wash a lot of gym clothes, towels, or baby clothes.

What You Will Need

  • Distilled white vinegar, 2 cups
  • Baking soda, half a cup
  • An old toothbrush or small brush
  • A clean microfiber cloth
  • Hot water, the hottest cycle your machine offers

Check your manual first. Some manufacturers warn against vinegar on rubber seals, especially with frequent use. Once a month is a sensible maximum. If your manual specifically says not to use vinegar, use a commercial washing machine cleaner instead.

The Two-Cycle Method: Step by Step

Step 1: Empty the machine. Remove all clothes, including stray socks. Clean the drum and check the seal for trapped items.

Step 2: Vinegar cycle. Pour 2 cups of white vinegar directly into the drum for a front-loader, or into the detergent dispenser if your manual prefers that. Run the hottest, longest cycle, usually labeled Cotton, Sanitize, or Tub Clean, at 60°C (140°F) or higher. The vinegar dissolves limescale, breaks down soap scum, and helps kill odor-causing buildup.

Step 3: Baking soda cycle. When the first cycle finishes, add half a cup of baking soda directly to the drum. Run a second hot cycle with the same settings. Baking soda is a mild abrasive and deodorizer. It lifts residue and absorbs smells that vinegar loosened.

Step 4: Scrub the seal and drawer. While the second cycle runs, make a paste of baking soda and a little water. Use an old toothbrush to scrub the detergent drawer, the drawer compartment, and the folds of the rubber door seal. These areas trap mold and residue that cycles alone cannot reach. Wipe them with a cloth dipped in vinegar, then rinse.

Step 5: Wipe and dry. When the cycles finish, wipe the drum with a clean cloth. Leave the door and detergent drawer open for at least an hour to air dry. This prevents mold from growing back. Wipe the door seal dry for extra protection.

Top-Loader Version

For a top-loader, the method is similar with one adjustment. Add 4 cups of vinegar as the drum fills with hot water, pause the cycle for an hour to let it soak, then finish the cycle. Then add 1 cup of baking soda and run a second hot cycle. Scrub the agitator, lid, and dispenser while the second cycle runs.

If your top-loader has a soak option, use it. The soak time helps vinegar work on buildup inside the drum.

Front-Loader Tips

Front-loaders need extra attention to the seal. Pull back the folds of the rubber gasket and wipe inside them. Black spots there are usually mold. A vinegar-soaked cloth left on the spot for an hour can help, but for heavy mold, you may need a commercial mold remover made for washing machines.

Also clean the drain pump filter, usually behind a small door at the bottom front of the machine. Place a towel underneath, unscrew the filter, remove lint and small items, rinse it, and replace it. Do this every few months.

What Vinegar and Baking Soda Cannot Fix

This method helps with light smells, soap residue, and limescale. It will not clear heavy biofilm — the slimy black residue that builds up behind the drum after years of cold washes — or deep mold in the seal. If the smell returns within a few days, or you see heavy black buildup, use a commercial washing machine cleaner with a Tub Clean cycle, or call a technician.

Do not use bleach and vinegar together. That combination creates harmful fumes. Use them on separate days, with a full rinse in between, if you use both.

How to Keep Your Machine Clean

  • Leave the door and drawer open between washes so the drum dries.
  • Use the right amount of detergent. Too much detergent leaves residue.
  • Run a hot wash once a week if you usually wash cold.
  • Wipe the seal after each wash, especially in humid climates.
  • Clean the machine once a month, even if it does not smell yet.

FAQ

Can I mix vinegar and baking soda together to clean my washing machine?

You can, but you should not. Mixing them neutralizes much of their cleaning power. Run them in two separate hot cycles for the best result.

Is vinegar safe for washing machines?

For most machines, occasional use is safe. Check your manual, use it no more than once a month, and do not let vinegar sit on rubber seals for long periods.

How often should I clean my washing machine?

Once a month is a good routine for most households. Clean more often if you notice smells, residue, or mold.

Can I use apple cider vinegar instead of white vinegar?

White vinegar is better for cleaning. Apple cider vinegar can leave color and residue, and it is usually more expensive.

Conclusion

Cleaning a washing machine with vinegar and baking soda works — but only if you use them separately. Run a hot vinegar cycle, then a hot baking soda cycle, scrub the seal and drawer, and leave the door open to dry. Do it monthly, use the right amount of detergent, and your machine will smell fresh, wash better, and last longer.

Author

liam alexanders

Follow Me
Other Articles
aktuellblick how to write a resignation letter
Previous

How to Write a Resignation Letter: Templates & Tips (2026)

Next

How to Renew Your US Passport Online in 2026: Eligibility, Fees, and Steps

One Comment
  1. How to Clean a Dishwasher the Easy Way (2026) says:
    November 5, 2026 at 5:11 pm

    […] read: How to Clean a Washing Machine with Vinegar and Baking Soda and How to Get Rid of Ants in Kitchen […]

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

aktuellblick logo

Bringing You the Latest News, Trends & Stories from Around the World — Stay Informed, Stay Ahead.

pages

  • Home
  • Contact Us
  • Cookie Policy
  • Disclaimer
  • Privacy Policy
  • Terms & Conditions
  • Facebook
  • Twitter
© 2026 Aktuellblick.com. All rights reserved.